De-nibbing Pads (Finishing Pads) - Used to Give Wooden Finishes a Perfectly Smooth Feel After the Application of an Oil or Varnish (5)

Product Information

These small abrasives are specially-engineered to quickly remove dirt, keep the repair area small and reduce cleanup time. Rub down the entirety of the top face and exposed side(s) of worktop, remove any dust with a clean cloth, and leave for an hour or so. The three dimensional structure of the pads is easy to use on contoured surfaces and profiles, as well as areas which are difficult to reach. Our Trizact™ abrasive stems in 1000 and 1500 grits snap quickly into the mini-sander for removing nibs and refining sand scratches. Together with the included Ultrafine Foam Polishing Pad, this system ensures virtually no sling, no sticking and no smearing.

Perfect-It™ Denibbing Polish removes 1500 sand scratches during the 3M™ Perfect-It™ Denibbing Process. This high-performing formula is a great denibbing tool, helping minimize the time and effort it takes to refinish paint jobs and remove sand scratches or swirl marks from previously compounded areas. Highly flexible circular neoprene pad with velcro face and rear elasticated hand strap, which accepts any 150mm dia hook n loop abrasive sanding discs. Cheaper 10 meter long rolls of the original multifunctional Abranet in a narrower 75mm width, which you can cut to your own size.There is no doubt that solid wood worktops look fantastic but they need a bit of loving care – wood is a natural material, after all.

Ideal for sanding rounded surfaces, internal coving, spindles and anything else you can wrap your hand around. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. These pads are much easier to use than sand paper on Molded surfaces and do not take off too much paint on the ridged parts. I bought ten of these pads for preparing painted radiators and architrave woodwork ready for a fresh coat of paint.Take the denibbing pads that can be found in our DIY Worktop Aftercare Kit and lightly rub the worktop down (the colour may appear slightly duller after this but do not be alarmed: you are temporarily removing a small portion of the oil to start with, this will allow for a silky finish later).